ROSENDALE-LOGO3

Just as the historic uses of Rosendale Natural Cement Products® were widespread and varied, Edison Coatings, Inc. has undertaken the task of custom-formulating a wide range of historically accurate and mechanically sound Rosendale cement-based products. Custom formulation work, which Edison Coatings routinely performs in support of its full complement of Restoration Products, is offered for the Rosendale Natural Cement Products® as well.

T

Product Group

Type

Description

Rosendale No. 10 C

Natural Cement and Quick-Setting Natural Cement

Various grades, grinds and blends of Natural Cement

Rosendale No. 11 G, 11Gi

Prepackaged Grouts and Injection Mortars

Natural Cement-based mixtures for filling of cracks and voids in masonry

Rosendale No. 12 M

Prepackaged, Custom-Matched Masonry Mortars

Natural Cement-based masonry mortars for repointing and rebuilding

Rosendale No. 13 P

Prepackaged, Custom-Matched Composite Patching Mortars

Natural Cement-based patching compounds for limestone, sandstone and historic concrete

Rosendale No. 14 S

Prepackaged Custom-Matched Stucco’s, Renders and Plasters

Natural Cement-based stucco for repair or replacement of historic stucco

Rosendale No. 15W

Pre-packaged, Custom- Matched Natural Cement  Limewash / Whitewash

Natural cement with or without Lime is prepared in conformance with 19th Century U.S. Govt. Specifications for whitewash- hydraulic limewash

Rosendale No. 16 B

Pre-packaged Concrete (Beton)

Natural Cement-Based Concrete Mix

Rosendale No. 17 L

Hydraulic Lime

Withdrawn 1/2015; Replaced with BioLime® Natural Hydraulic Limes; For more information visit NaturalMortars.com

he following groups of Rosendale Natural Cement Products® have been established:

 

BUY ONLINE NOW!

[Home] [History] [Performance] [Chemistry] [Specifications] [Products] [Support] [Safety] [Historic Mortars] [Conferences]

3 Northwest Drive

Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280

E-Mail: Contact Us

Rosendale Natural Cement Products®
is a registered trademark of Edison Coatings, Inc.

Rosendale Natural Cement Products® are manufactured in the United States of America from 100% American Natural Cement. This is authentic historic material, extracted from historic sources, as originally used in construction of thousands of American and Canadian buildings and structures in the 19th and 20th Centuries. Rosendale 10C Natural Cement and Quick Setting Natural Cement conform to the requirements of ASTM C10/10M-14.

Translantic Natural Cements(TM) are manufactured in the United States of America from USA and globally-sourced components. Translantic Natural Cement conforms to the requirements for Quick-Setting Natural Cement in ASTM C10/10M-14.

Accept No Substitutes!

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. Product data and formulations are subject to change without prior notice. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE.

Copyright 2014-17, Edison Coatings, Inc., All Rights Reserved